Central Aerohydrodynamic Institute
RUS
Printer friendly

Wind tunnel T-105

Basic parameters

Flow velocity 5–40 m/s
Flow direction upwards
Reynolds number per 1 m up to 2.4*106
Total pressure atmospheric
Dynamic pressure up to 0.75 kPa
Stagnation temperature environmental
Side slip angle 0°-360°
Test section dimensions:
Nozzle diameter 4.5 m
Test section length 7.5 m

Download PDF


General description

T-105 is a vertical, continuous-operation, closed-layout wind tunnel with a round open test section. A fan driven by an electric motor of 450 kW generates the flow. The wind tunnel is designed to investigate spin modes by testing dynamically similar models of aircraft and other flight vehicles in free flight. It is also widely used for investigations of aerodynamic characteristics of flight vehicles and their elements using special equipment with balance complexes.



Capabilities

The following types of tests can be carried out in T-105:
  • determination of motion parameters of dynamically similar models at vertical descending mode;
  • determination of aerodynamic characteristics of aircraft models at the attack and slip angle range from 0 up to 360° with and without
  • rotation;
  • determination of aerodynamic characteristics of helicopter main rotors (from one up to two rotors in different combinations, including one-rotor, coaxial, longitudinal and lateral configurations);
  • determination of aerodynamic characteristics of helicopter and convertorplane models with main rotor models with the groundsimulation screen;
  • determination of aerodynamic characteristics of airship models with propeller models, balloons and parachute systems;
  • determination of aerodynamic characteristics of the models of one-rotor helicopter control devices;
  • investigations of industrial objects models under exposure to the wind;
  • measurements of pressure distribution along the model surface including that of the rotating blades;
  • measurements of the velocity fields close to the flight vehicle models;
  • different types of visualization of the flow on the model surface and in the area close to the model.


Technological advantages

  • Vertical flow enabling free flight spin testing;
  • Open test section, which allow convenient access to the tested models.


Practical application

Investigations of spin modes and aerodynamic characteristics of civil and military aircraft at angles of stall (e.g. Su-27, MiG-29, Il-96, Tu-204, Tu-334).
Development of aerodynamic layout of helicopters Mi-26, Mi-38, Mi-34, Mi-28, Ka-32, Ka-50, Ka-62.